PARTICLE TRANSFER ROLLERS

Cleaning Instructions and General Information on PTR's

San Lab Systems PTR's will remove dust, dirt and lint from film for a period of 3-4 months of constant use, if cleaned properly and regularly.

Cleaning Instructions

• Wash PTR's in cold water with a mild detergent, at a rate of 2-4 drops per liter of water. Use slightly more detergent if the water is "hard". San Lab Systems recommends Palmolive^® detergent.
• Do not use dishwasher detergent!
• Do not use hot water as it can cause PTR's to become very sticky and cause excessive adhesion and potential damage to the film.
• Do not use packaging or other tapes to clean a PTR after it has been washed! Packaging tape will transfer some of its adhesives to the PTR and cause excessive adhesion of the film to the PTR, resulting in damage to the film. Simply wash the PTR's and allow them to dry thoroughly before re-installation.
• If cleaned properly, PTR's should roll off one another when stuck together. PTR's that stick together without falling off must be re-washed in cold water and (Palmolive^®) detergent.

General PTR Information:

• San Lab Systems PTR's are available in 4 colors (blue, green, purple and orange). All colors are identical in function, differing only by their color. Many customers use different colors to identify film formats or simply color preference.
• All PTR's are anti-static. Surface resistance has been reduced to 10 to the power of 3^rd ohms.
• PTR's can be ordered by contacting our office.
    Phone: 416.461.7196
    Fax:    416.469.2299
    Email:  info@sanlabsystems.com